Persol corporation has established as Grass rot complex for the Supplying different petrochemical products such as Plastics, Synthetic rubber and other chemical from naphtha as feedstock. All the commodities are adopting the advanced and modern technologies are tailored to meet the internationally acceptable application grades and purities both for polymers and chemical products. All the products offering from Persol corporation Company is holding the ISO 90001-Version 2000, ISO 14001-2004 and OHSAS 18001-1999 certificates as well.
|
List of some addition polymers and their uses |
|||
|
Polymer |
Abbreviation |
Properties |
Uses |
|
LDPE |
Chemically inert, flexible, insulator |
Squeeze bottles, toys, flexible pipes, insulation cover (electric wires), six pack rings, etc. |
|
|
High-density polyethylene (HDPE) or polyethylene high-density (PEHD) is a thermoplastic polymer produced from the monomer ethylene. It is sometimes called "alkathene" or "polythene" when used for HDPE pipes. |
HDPE |
Inert, thermally stable, tough and high tensile strength |
Bottles, pipes, inner insulation (dielectric) of coax cable (see also PTFE), plastic bags, etc. HDPE is used in the production of plastic bottles, corrosion-resistant piping, geomembranes and plastic lumber. |
|
LLDPE is being used in extrusion coating applications where it helps protect the contents of liquid containers, primarily for paper and paperboard packaging. |
LLDPE |
Chemical |
Non-food packaging applications are requiring stronger films such as consumer, industrial and agricultural uses. |
|
It is non-toxic and odorless and acts like candles when fired and has a smoke-free flame which can be attributed to the lightness, hardness, and high chemical resistance and appearance of the polymer, which causes variation in the products produced from this raw material. |
PP |
Auto parts, industrial fibers, food containers, liner in bags, dishware and as a wrapping material for textiles and food. Plastics, film and sheet industry, molding, food packaging, textile and fiber production, pipes and some construction applications as well as automotive components such as flooring and battery boxes. |
|
|
Polystyrene (thermocole) |
PS |
Thermal insulator. Properties depends on the form, expanded form is tough and rigid |
|
|
PVC is a plastic material that is used for many purposes, for example to make clothing or shoes or to cover chairs. PVC is an abbreviation for 'polyvinyl chloride'. There are soft and hard PVCs, each with its use, for example, soft PVC is used in the production of |
PVC |
Insulator, flame retardant, chemically inert |
Pipe ( mainly draining), fencing, lawn chairs, hand-bags, curtain clothes, non-food bottles, raincoats, toys, vinyl flooring, electrical installation insulations, etc. Table cloths and wallpaper and hard in the manufacture of toys and construction equipment. |
PVC E
|
Parameter |
Test method |
Grades |
|
|
Grade |
ISO |
DIN |
E6834 |
|
K- Value |
ISO 1628/2 |
DIN 53726 |
67-69 |
|
Sieve analysis ≥63µ (%) |
ISO 565 |
DIN 53724 |
≤ 2 |
|
Volatile matter (%) |
ISO 1269 |
DIN 7764/2 |
≤ 0.3 |
|
Methanol extract (%) |
ISO 6427 |
DIN 53738 |
≤ 2.2 |
|
Residual VCM (ppm) |
ISO 6401 |
DIN 53743 |
≤ 2 |
|
Thermos ability (min) |
Vinnolit THMA 180 |
≥ 15 |
|
|
Paste Viscosity, |
ISO 3219 |
DIN EN 11468 |
≤ 6 |
|
after 1 h (Pas) |
|||
- Rigid Foam for Flooring,
- Leather Cloth,
- Sealing Compounds,
- Coating and Laminating
PVC S
|
Parameter |
Grades |
|
Grade |
S6532 |
|
K- Value |
64-66 |
|
Viscosity number (ml/g) |
101-109 |
|
Bulk density(g/l) |
550-610 |
|
Grain size(% > 63 µm) |
95-100 |
|
Grain size(% >250µm) |
0-1 |
|
Porosity (% wt) |
19-25 |
|
Volatiles Matter (% wt) |
< 0.3 |
|
Followability (s/150g) |
≤ 25 |
|
Residual VCM (ppm) |
≤ 1 |
|
Dark resin (Con./250g) |
≤ 20 |
|
Fish eyes(Counts/25cm2) |
≤ 20 |
- Rigid and Semi-Rigid and Plasticized PVC ,
- Pipes,
- Profiles,
- Tubes,
- Sheets and Film.